DIY 1000mm Drone folding frame quadcopter Carbonfiber frame for Industry Application Drone can match Payload 5KG

Picture list：
X770C Quadcopter fold Frame: 1set
DFL25-13 Electronic Retractable Landing Gear : 1set

NO.1 Tie-in way:
(Diagonal wheelbase: 1000mm)
X770C Quadcopter fold Frame: 1set
DFL25-13 Electronic Retractable Landing Gear : 1set

NO.2 Tie-in way:
(For 6S POWER)
X770D Quadcopter fold Frame: 1set
DFL25-13 Electronic Retractable Landing Gear : 1set
6215 KV320 Motor :4pcs
6S 60A ESC:4pcs
2170 Nylon fold propeller：2pair（CW+CCW)

NO.3Tie-in way:
(For 12S POWER)
X770E Quadcopter fold Frame: 1set
DFL25-13 Electronic Retractable Landing Gear : 1set
6215 KV180 Motor :4pcs
12S 80A ESC:4pcs
2270 Nylon fold propeller：2pair（CW+CCW)

NO.4 Tie-in way:
(For 12S POWER)
X770E Quadcopter fold Frame: 1set
DFL25-13 Electronic Retractable Landing Gear : 1set
7205 Motor : 4pcs
12S 80A ESC: 4pcs
2470 Nylon fold propeller：2pair（CW+CCW)

NO.5 Tie-in way:
(Diagonal wheelbase: 1000mm)
X770C Quadcopter fold Frame: 1set

NO.6 Tie-in way:
(Standpipe: 430mm, Horizontalpipe: 450mm)
DFL25-13 Electronic Retractable Landing Gear : 1set

NO.7 Tie-in way:
(Standpipe:430mm, Horizontalpipe: 450mm)
DFL-02 Landing Gear : 1set

NO.8 Tie-in way:
DQ-01 Drone Quick release mount :1set

NO.9 Tie-in way:
HDS-05 Hight Brightness Drone Spotlight:1pcs

NO.10 Tie-in way:

Tattu 6S 12000mah Battery: 2pcs( with XT90 plug)

NO.11 Tie-in way:
6S 22000mah Semi Solid Lithium Battery: 2pcs(with XT90plug)

NO.12 Tie-in way:
Pointed bit:1pcs (For 3.0mm Hole)

NO.13 Tie-in way:
Pointed bit:1pcs (For 3.0mm Hole)
Flat-bottom bit : 1pcs

X770C Frame packing list:
(Diagonal wheelbase: 1000mm)
2.0mm Thickness Top center carbon fiber plate : 1pcs
2.0mm Thickness Bottom center carbon fiber plate: 1pcs
25*23*231.5mm carbon fiber tube: 4pcs
M3*37mm Aluminum standoffs : 8pcs
ACL25-01 Φ25 Aluminum motor mount: 4pcs
AML25-08 Φ25 Aluminum folding kit: 4pcs

1. This frame kit is a folding frame。
2. Sample structure, easy to install, easy to carry
3. Equipped with appropriate power system to For 5~8kg take-off weight.
4. The frame kit is made of 3K full carbon fiber, CNC aluminum parts, light weight
5. Robust rigidity, higher stability and vibration resistance
6. Carbon fiber is a conductor material and is insulated.
7. When installing the frame kit parts, you need to make some 242 glue on screws, to avoid the screws loosen when flying.
8. when you receive the products ,it is just all the parts, not assembled well.
9. The frame body can be custom-made , we can do the drones according to your requirements.
10. Change the motor mounting hole according to the different motor.